返回首页

保定建兴模具制造有限公司

本站导航

新闻动态

当前位置:网站首页 > 新闻动态 > 详细信息
三相分离化粪池技术
添加时间:2019/11/11 14:06:05     浏览次数:
三相分离化粪池技术是在传统化粪池的基础上,保留了化粪池中泥水混合的优点,增加了“污水、污泥、消化气”三相分离的技术,在化粪池的出水端设置三相分离装置,使出水端的污泥、消化气与污水处理过程分离,避免气浮现象对污水处理的干扰。出水端的沉淀槽参照平流沉淀池技术标准,污水沉淀时间2小时之内。
The three-phase separation septic tank technology is based on the traditional septic tank, which retains the advantages of mud water mixing in the septic tank, and increases the technology of three-phase separation of "sewage, sludge and digestion gas". A three-phase separation device is set at the effluent end of the septic tank to separate the sludge, digestion gas and sewage treatment process at the effluent end, so as to avoid the interference of air flotation on sewage treatment. The sedimentation tank at the outlet end shall refer to the technical standard of horizontal flow sedimentation tank, and the sewage sedimentation time shall be within 2 hours.
上一页  化粪池的堵塞问题  
下一页  玻璃钢化粪池分层回填
  • 关于我们
  • 新闻动态
  • 案例展示
  • 网上订单
  • 联系我们
  • 化粪池模具

Copyright © 技术支持:遨游网络

  • 一键拨号
  • 网上订单
  • 工程案例
  • 本站导航

搜索

  • 关于我们
  • 新闻动态
  • 案例展示
  • 网上订单
  • 联系我们
  • 化粪池模具